Planning A Route Using A Different Starting Point - Nextar Q4-01 Hardware Instruction Manual

Planning a Route Using a Different Starting
Point
The SET ORIGIN option in the GPS allows you to set the car position manually in order
to plan or preview a route from a different starting point. You can also use this option to
set the vehicle position manually when GPS data is not available.
To plan or preview a route from a different starting location —
•
Tap on the map and place the display in Browse mode, find the location you
want to use as the starting point, and then choose MENU > SETTINGS > SET
ORIGIN. At the Set Origin Instructions screen, tap the OK button.
—Or—
•
Tap MENU > GO TO DESTINATION and set a destination to a particular
location. In the Destination Confirmation screen, tap SET ORIGIN. (See the
example below.)
Tap SET ORIGIN to define the selected destination as the current starting point
When you are finished setting origin, set a destination and then tap GO when prompted.
The turn-by-turn instructions in the main screen will display trip information from the
alternate starting point to the end-point destination you specify. The system will restore
the GPS location as the origin if the car is determined to have moved at least 300 feet.
For more information, see
By-Turn Views .
Setting Destinations and
24
Tap SET ORIGIN to set this location as
the starting point for planning a route.
Selecting and Working with Turn-