Hunter 23781 Owner's Manual And Installation Manual page 14

7 • Completing Your Installation With or Without a Light Fixture (continued)
Uninstalling the Light Fixture
1. Loosen and remove the three screws that attach the light kit
to the light kit mounting plate.
2. Uninstall the nut inside the lower switch housing.
3. Disconnect the plug connectors between the black wire and
the black/white wire.
4. Disconnect the plug connectors between the two white
wires.
5. Remove the two light kit assembly screws.
6. Unscrew the lower switch housing from the threaded rod.
7. Remove the light fixture from the lower switch housing
pulling disconnected wires through the hole in the center of the
lower switch housing.
8. Install the switch housing cap and plug button to the lower switch
housing.
9. Install the lower switch housing to the upper switch housing with
three screws.
Lower
Switch Screws
Housing Step 9
Plug
Button
14
42609-01 • 01/12/11 • Hunter Fan Company
Step 1
Lower
Switch
Housing
Step 2
Light Assembly Screws
Cap
Step 8
Step 5
Light Kit
Nut