Transmitting Midi Messages From The Sequencer Software To A Midi Sound Module Or Digital Piano - Edirol UM-1EX Owner's Manual

Transmitting MIDI Messages from the sequencer software to a
MIDI sound module or digital piano
If transmitting MIDI messages from the sequencer software to a MIDI sound module or digital
piano, or if using a MIDI sound module's or digital piano's sound generator to play the sounds
from the playback of sequencer software on the computer, make the following connections and
settings.
fig.connect-out_e
MIDI messages are transmitted
from the sequencer software.
MIDI Message Flow
MIDI device setting
MIDI OUT
For more on how to make the settings, refer to "Getting Connected and Installing Drivers"
(Windows:p. 11 / Macintosh:p. 21).
* If you are using sequencer software that does not utilize Windows or Macintosh standard device settings, make
the device settings within the sequencer software.
THRU switch setting
THRU Switch
MIDI messages from the computer are transmitted to the MIDI device (e.g., MIDI sound module,
digital piano) connected to the UM-1EX's MIDI OUT cable.
* Don't change the setting of the THRU switch while you're using the UM-1EX. Doing so will cause MIDI
errors.
34
Connect to the
computer's
USB connector.
THRU OFF
UM-1 MIDI
OFF
Connect to the MIDI IN
connector of the MIDI sound
module or digital piano.
Message Flow
MIDI Sound Module
Digital Piano