Edirol UM-1EX Owner's Manual page 14

13.
Operation of the UM-1EX
A message of "Found New Hardware" will appear. Please wait.
* This unit is equipped with a protection circuit. A brief interval (a few seconds) after connecting the UM-
1EX is required before the unit will operate normally.
Windows XP:
1. The Found New Hardware Wizard dialog box will appear.
If the message "Connect to Windows Update to search for software?" appears, choose "No"
and then click [Next].
2. Make sure that "EDIROL UM-1" is indicated. Then, choose "Install the software
automatically (Recommended) " and click [Next].
If "Driver Signing Options" in step 4 is set to anything other than "Ignore," a dialog box with
an "!" symbol will appear. Click [Continue Anyway] to proceed with the installation.
Windows 2000:
If "Driver Signing Options" in step 4 is set to anything other than "Ignore," a dialog box
indicating "Digital Signature Not Found" will appear. Click [Yes] to proceed with the
installation.
14. The Completing the Found New Hardware Wizard dialog box will appear.
Click [Finish].
15. In the Driver Setup dialog box, click [Close].
This completes driver installation.
If the Change System Settings dialog box appears, click [Yes]. Windows will restart
automatically.
* If you changed the "Driver Signing Options" setting (step 4 on p. 12), restore the original settings
after Windows has restarted.
Next, in order to ensure that MIDI processing occurs smoothly, you need to make settings so that
Background Services is given priority.
(➔ "Giving priority to Background Services" (p. 15))
14
Connect the UM-1EX to your computer.