Mac Os X Users - Edirol UM-1EX Owner's Manual

Mac OS X users

■
Installing the driver
* If the "Authenticate" dialog box appears during the installation, input the password and click "OK."
* What you actually see on your Macintosh screen may be different, depending on your computing
environment and the operating system you're using.
1. With the UM-1EX left unconnected, start up Macintosh.
* Disconnect all USB cables other than those for your keyboard and mouse, and restart your Macintosh.
2. Exit all currently running software (applications).
3. Prepare the CD-ROM.
Insert the CD-ROM into the CD-ROM drive of your Macintosh.
4. In the Driver (Mac OS X) folder of the CD-ROM, double-click UM1USBDriver.pkg.
* A message such as "This Installer package needs to..." may appear.
Click "Continue."
5. The display will indicate "Welcome to the EDIROL UM-1Driver Installer." Click [Continue].
6. The display will indicate "Select a Destination."
Click the drive in which the operating system is installed to select it, and then click [Continue].
* Select your startup disk as the drive.
7. The display will indicate "Easy Install."
Click [Install] or [Upgrade].
8. The display will indicate "Installing this software requires you to restart your computer when
the installation is done."
Click [Continue Installation].
9. The display will indicate "The software was successfully installed."
Click [Restart] to restart your Macintosh.
This completes installation of the UM-1 driver.
Next, make MIDI device settings. (
22
→
"Setting the driver" (p. 23))