Interfaces; Leds; Hardware Overview - D-Link DWL-6600AP Quick Installation Manual

2. Hardware Overview

LEDs

5 GHz – When this LED is lit, the access point is operating at 5GHz. It will blink when there
is wireless traffic.
2.4 GHz – When this LED is lit, the access point is operating at 2.4GHz. It will blink when
there is wireless traffic.
LAN – When this LED is lit, the device's Ethernet port is connected to an active router or
switch. The light will blink when there is traffic going through the port.
POWER – When this LED is lit in red, the access point is during boot-up. When this LED is
lit in green, the access point is ready.

Interfaces

Console Port
Power Receptor
LAN Port (PoE)
3
D-Link DWL-6600AP Quick Install Guide