ATI Technologies X3-256 - 100-505096 FireGL 256MB AGP 4x/8x Dual DVI Graphics Card User Manual page 26

20 ATI Displays Tab
ATI Displays Tab
Scheme
Hotkey
Display
Configuration
button
Save button
Delete button
Display buttons
To enable or disable a display
If the enable/disable button is green, it indicates the device is enabled. If it
is red, it indicates the device is disabled. If the button is greyed out, the
device is not an option. For example, if there is only one monitor
connected, all buttons will be grey.
1
Click the enable/disable button
want to enable/disable.
2
Click OK or Apply to save the changes.
Note: Due to power restrictions, you can normally only have two
devices active at the same time; for example, two monitors or a
monitor and a TV.
To save a display-device scheme
Display-device selections can be saved as a scheme for quick recall.
Displays the drop-down list of available display-device
configurations that have previously been created. New
configurations can be entered here and then saved using
the Save button.
Associates a hotkey with a scheme. To input the hotkey,
highlight the field and press the appropriate key
combination on your keyboard.
These are the buttons that contain the name of the
devices that can be connected to your graphics card, such
as Monitor, Panel, FPD, TV or YPrBr. Clicking on any of
these buttons opens further options to refine your display
on that device.
Only the type of devices supported by your graphic card
will be displayed as valid options.
If the text on the button is greyed out, that device is not
currently connected to your graphics card.
Saves display-device configuration schemes.
Deletes display-device configuration schemes.
Enables or disables a display device; they also indicate
whether a device is enabled or disabled.
for the display device you