66 Set the Anti-Aliasing preference manually
• Catalyst™ A.I.
• Mipmap detail level
• Wait for display refresh
• SmartShader™ Effects
• Adaptive Anti-Aliasing
This page is useful when it is not necessary to preview the adjusted settings
because the effect is already known or understood.
Set the Anti-Aliasing preference manually
1
From the Tree View pane, expand 3D.
2
Click All Settings.
3
Ensure the application override is disabled. To do so, make sure the
Let the Application Decide check box is cleared. The slider control
will become available.
4
Click the Control slider and move the selector to your preferred
setting:
• To increase processing performance, move the slider to the left.
• To increase image quality, move the slider to the right.
Set the level of adaptive anti-aliasing
1
From the Tree View pane, expand 3D.
2
Click Adaptive Anti-Aliasing.
3
Adjust the Adaptive Anti-Aliasing control slider to the desired
setting.
Set the Anisotropic Filtering preference manually
1
From the Tree View pane, expand 3D.
2
Click All Settings.
3
Ensure the application override is disabled. To do so, make sure the
Let the Application Decide check box is cleared. The slider control
will become available.
4
Click the Control slider and move the selector to your preferred
setting:
• To increase processing performance, move the slider to the left.
• To increase image quality, move the slider to the right.