Understanding The Basics; Turning Your Tv On Or Off; Selecting The Video Input Source - Insignia NS-39L700A12 User Manual

Insignia 39" LCD TV
11 Press or to highlight Antenna, Cable, or
Cable/Satellite Box (if your cable TV uses a box,
select Cable/Satellite Box), then press ENTER.
If you chose Antenna or Cable, your TV
automatically starts scanning for channels
available in your viewing area. If you chose
Cable/Satellite box, your TV does not need to
scan for channels.
During auto channel search, your TV searches
for digital channels first. When the digital
channel search is complete, a message appears
asking if you want to search for analog channels.
Select Yes to continue searching for analog
channels, or select No to stop searching for
channels.
Note
You can press EXIT to stop the auto channel search,
but you will need to run the auto channel search
again to create a channel list.
12 To watch TV, press INPUT, press
highlight the video input source for your TV in
the INPUT SOURCE list, then press ENTER.
• If your TV is connected to an antenna, cable TV
(no box), or cable or satellite TV box using a
coaxial cable, select TV.
• If your TV is connected to a cable or satellite
box using an HDMI cable or HDMI cable with a
DVI adapter, select HDMI1 or HDMI2.
• If your TV is connected to a cable or satellite
box using a component video cable, select
Component.
• If your TV is connected to a cable or satellite
box using a composite video cable, select AV.

Understanding the basics

Turning your TV on or off

To turn your TV on or off:
1 Make sure that the power cord is connected to a
power outlet.
2 Press (power) to turn on your TV.
3 Press (power) again to turn off your TV. Your
TV enters standby mode, and the power
indicator LED turns red.
Warning
When your TV is in standby mode, it is still receiving
power. To completely disconnect power, unplug the
power cord.
Note
If your TV does not receive an input signal for several
minutes, it automatically goes into standby mode.

Selecting the video input source

To select the video input source:
1 Turn on your TV, then press INPUT. The INPUT
or to
You can also press a direct input button to select
the video input source.
• Press TV to select TV (if your TV is connected to
• Press VIDEO to select AV IN VIDEO.
• Press COMP to select COMPONENT IN.
• Press HDMI once to select HDMI1. Press twice to
www.insigniaproducts.com
SOURCE list opens.
INPUT SOURCE
TV
AV
Component
HDMI1
HDMI2
USB
Note
If your TV is connected to an antenna, cable TV
(no box), or cable or satellite box using a coaxial
cable, select TV to watch TV.
If your TV is connected to a cable or satellite box
using a different video connection, select the
matching video input source to watch TV.
an antenna, cable TV (no box), or cable or satellite
TV using a coaxial cable).
select HDMI2.
20