Insignia NS-39L700A12 User Manual page 16

Insignia 39" LCD TV
Using composite video (good)
To connect a cable or satellite box using
composite video:
1 Make sure that your TV's power cord is
unplugged, and all connected equipment is
turned off.
2 Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3 Connect an A/V cable (not included) to the
AV IN VIDEO jack and L/R AUDIO jacks on the
side of your TV and to the composite video and
audio out jacks on the cable or satellite box.
Note
The AV IN VIDEO jack shares the audio jacks with the
COMPONENT IN video jacks.
When you connect the audio using the L/R AUDIO
jacks, the audio output is analog.
Cables are often
color-coded to match
color-coded jacks.
Note: The yellow video
connector on the AV cable
connects to the green
AV IN VIDEO jack.
Cable or satellite box
4 Plug your TV's power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite box.
5 Go through the Setup Wizard on page 19.
Using coaxial (good)
USB
R
P
AUDIO
R
L
P
B
Y/ VIDEO
www.insigniaproducts.com
To connect a cable or satellite box using coaxial:
1 Make sure that your TV's power cord is
unplugged, and all connected equipment is
turned off.
2 Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3 Connect a coaxial cable (not included) to the
ANT/CABLE IN jack on the side of your TV and
to the coaxial out jack on the cable or satellite
box.
Coaxial cable
Cable or satellite box
4 Plug your TV's power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite box.
5 Go through the Setup Wizard on page 19.
Notes
• Use a coaxial cable to eliminate interference and
noise from radio waves.
• Do not bundle the coaxial cable with the power
cord or other cables.
USB
R
P
AUDIO
R
L
P
B
Y/ VIDEO
12