Table of Contents
Advertisement
• When the memory is initialized, music files on the recording media that
was initialized will be erased as well. Use the supplied software Music
Transfer Utility to transfer music files from the supplied
Manual/Music Data CD-ROM to the camcorder. For details, refer to
the 'Music Transfer Utility Software Guide' (PDF file).
• The
Instruction Manual/Music Data CD-ROM includes also extra
music tracks that were not pre-installed in the built-in memory.
• Video snapshot is deactivated if the camcorder is switched to playback
mode or if the camera mode dial is set to
• Transfer music files to the same memory that contains the video snap-
shot scenes you want to play back.
• When music files are transferred to the built-in memory or to a memory
card after repeatedly recording and deleting recordings (fragmented
memory), the movies and background music track may not be played
back correctly. In such case, we recommend saving your recordings on
a computer (
music files and only then writing the video files back to the camcorder.
• If the USB cable is disconnected while transferring music files to the
camcorder, it may not be possible to correctly play back those music
tracks. Delete the music tracks from the camcorder, and transfer the
music files again.
Pre-recording Function
The camcorder will start recording 3 seconds before you press
START/STOP
, ensuring you do not miss important shooting opportuni-
ties. This is especially useful when it is difficult to predict when to start
recording.
Operating modes:
1 Open (
) the joystick guide.
2 Select (
) [
•
appears.
• Press
again to turn pre-recording off.
START/STOP
3 Press
The scene recorded in the memory will start
3 seconds before
62
Video
120), initializing the memory (
Pre REC] and press
.
START/STOP
.
.
was pressed.
Instruction
37), transferring the
Pre REC
Advertisement
Table of Contents
