Canon 4063B001 Instruction Manual page 155

Cannot play back Cannot access the built-in memory
- There is a problem with the built-in memory.
Cannot play back Check the memory card
- There is a problem with the memory card.
Cannot play the movies in the built-in memory Initialize only using the camcorder
- The camcorder's built-in memory was initialized using a computer. Initialize the built-in mem-
ory with this camcorder (
Cannot play the movies on this memory card
- Movies cannot be played back from a 64 MB or smaller memory card.
Cannot play the movies on this memory card Initialize only using the camcorder
- The memory card in the camcorder was initialized using a computer. Initialize the memory
card with this camcorder (
Cannot record
- There is a problem with the memory.
- This message can also appear if condensation has formed (
corder dries completely before resuming use.
Cannot record Cannot access the built-in memory
- There is a problem with the built-in memory.
Cannot record Check the memory card
- There is a problem with the memory card.
Cannot record movies in MXP/FXP mode on this memory card
- Movies cannot be recorded in MXP or FXP mode on a memory card if it is rated Speed Class
2. Select a different recording mode (
Speed Class 4 or 6.
Cannot record movies in the built-in memory Initialize only using the camcorder
- The camcorder's built-in memory was initialized using a computer. Initialize the built-in mem-
ory with this camcorder (
Cannot record movies on this memory card
- Movies cannot be recorded on a 64 MB or smaller memory card.
Cannot record movies on this memory card Initialize only using the camcorder
- The memory card in the camcorder was initialized using a computer. Initialize the memory
card with this camcorder (
Change the battery pack
- Battery pack is exhausted. Replace or charge the battery pack.
Check the memory card
- Cannot access the memory card. Check the memory card and make sure it is inserted cor-
rectly.
37).
37).
40) or replace the memory card with one rated
37).
37).
169). Wait until the cam-
Additional Information
155