Yamaha TOOLS for TYROS Installation Manual page 5

4
Click [Next].
The window below enables you to select the search method.
5
Check the radio button to the left of "Search for the best
driver for your device. (Recommended)." Click [Next].
The window that enables you to select a location in which to
install the driver appears.
6
Check the "CD-ROM drive" box and uncheck all other items.
Click [Next].
• The system may ask you to insert a Windows CD-ROM while it
checks for the driver. Specify the "USBdrv_" directory of the CD-
ROM drive (such as D:\USBdrv_\) and continue the installation.
7
When the system detects the driver on the CD-ROM and is
ready for installation, it displays the following screen.
Make sure that the "YAMAHA USB MIDI Driver" is listed,
and click [Next]. The system starts the installation.
8
When the installation is complete, the following screen
appears. Click [Finish].
• Some computers may take about ten seconds to show this screen
after the installation is complete.
Windows 98
Windows Me
The driver has been installed.
Installing the driver on a Windows 2000 system
1
Start the computer and use the "Administrator" account to log
into Windows 2000.
2
Select [My Computer] → [Control Panel] → [System] →
[Hardware] → [Driver Signing] → [File Signature Verifica-
tion], and check the radio button to the left of "Ignore -Install
all files, regardless of file signature" and click [OK].
3
Insert the included CD-ROM into the CD-ROM drive.
4
Make sure the POWER switch on the TYROS is set to OFF
and use the USB cable to connect the USB terminal of the
computer (or the USB hub) to the USB terminal of the
TYROS. When the TYROS is turned on, the computer auto-
matically displays the "Found New Hardware Wizard." Click
[Next].
5
Check the radio button to the left of "Search for a suitable
driver for my device. (Recommended)." Click [Next].
The window that appears enables you to select a location in
which to install the driver.
6
Check the "CD-ROM drives" box and uncheck all other
items. Click [Next].
• The system may ask you to insert a Windows CD-ROM while it
checks for the driver. Specify the "USBdrv2k_" directory of the CD-
ROM drive (such as D:\USBdrv2k_\) and continue the installation.
7
When the installation is complete, the system displays "Com-
pleting the Found New Hardware Wizard." Click [Finish].
• Some computers may take about ten seconds to show this screen
after the installation is complete.
8
Restart the computer.
The driver has been installed.
TOOLS for TYROS INSTALLATION GUIDE
For Windows Users
5