The [From Disk] Button - Yamaha Portatone PSR-5700 Advanced Features

[F5] Disk
FROM DISK
00:N_FILE00 _
FROM DISK
01:N_FILE01 _
– +
FROM DISK
01:N_FILE01 _
– +
44

The [FROM DISK] Button

Press this button when you want to re-load a previously saved file from
floppy disk. The data loaded is the same as that saved by the TO DISK
operation described above. When the [FROM DISK] button is pressed the
display shown to the left will appear:
TO DISK
Size: 35k
NO YES
FROM DISK
Use the left [-] and [+] buttons to select the number of the file to load (00
Size: 35k
— 99, file numbers that contain no data will not be displayed). The name of
NO YES
the selected file will be displayed to the right of the number, and the size of
– +
the file in kilobytes (approximate) will be shown on the upper display line.
When the file number has been specified, press the right [+] button under
"YES" on the display to execute the load operation (or press the [-] button
under "NO" on the display to cancel the operation). "Don't remove disk"
Size: 35k will appear while the data is being loaded, and the amount of remaining
NO YES
data to be loaded will be displayed in arbitrary units on the upper display
– +
line. "Completed!" will appear when the data has been successfully loaded.
The [FROM DISK] button allows all data in a file to be loaded at once.
To load individual data groups use the FROM DISK function described on
page 45.
See page 48 for a list of error messages that may appear during a disk
load operation.
DISK
IN USE