Yamaha Portatone PSR-5700 Advanced Features page 4

The Sequencer
Recordable Parameters
Tracks 1 — 7
• Note on/off
• Pitch bend
• Modulation
• Sustain on/off
• Orchestra 1 & 2 volume
• Voice change (including custom voice on/off)
• Tempo (if ACCOMP. track contains no data)
• Glide on/off
• Percussion pad on/off*
• Tempo pad tempo value*
• Multi pad on/off (phrase only)*
* The pad mode selected when the sequence
is played back will be used.
V
Select the Record Track(s)
PLAY REC PLAY REC PLAY REC
1 2 3
CHORD 1 CHORD 2 CHORD 3
4
Accompaniment Track
• Chord & root (note on/off in Manual Bass
mode)
• Style change (styles with the same time
signature only)
• Rhythm volume
• Bass volume
• Chord 1 volume
• Chord 2 volume
• Tempo
• Reverb on/off & depth
• Reverb type
• Effect on/off & depth
• Effect type
IMPORTANT
DETAIL
DETAIL
DETAIL
AUTO BASS CHORD accompaniment can only be recorded on the
ACCOMP. track. The ORCH.1 and ORCH.2 voices can be recorded on any
of the remaining 7 tracks, but only one of these tracks can be recorded at a
time if the normal ORCH.1 orchestration is selected. If the ORCH.2+1 or
ORCH.2v1 orchestration is selected, two record tracks must be selected
— the ORCH.1 voice will be recorded on the lower-numbered track while
the ORCH.2 voice will be recorded on the higher-numbered track. This
means that a maximum of three record tracks can be specified when the
ORCH.2+1 or ORCH.2v1 orchestration is selected: ACCOMP. and any
two numbered tracks.
To select the record track(s) and engage the record-ready mode, hold the
[RECORD] button and press the appropriate track button(s). The red REC
indicator for the tracks will flash. Also note that the AUTO BASS CHORD
indicator will light automatically when the ACCOMP. track is selected.
PLAY REC PLAY REC PLAY REC PLAY REC PLAY REC
4 5 6 7 ACCOMP.
CHORD 4 CHORD 5 CHORD 6 BASS RHYTHM
DETAIL
HINT
• Effect control
• Harmony on/off and type
• Interactive Accompaniment on/off
• Interactive Accompaniment variation
• Interactive Accompaniment mode & sensitivity
• Auto Bass Chord mode
• Percussion Pad on/off
• Pad function (Multi/Tempo/Perc)
• Repeat/Synchro/Break on/off
• Manual bass on/off, voice
• Intro, fill in & ending
• Chord pad chord sequence
• Tempo pad tempo value
When the sequencer mode is engaged all previous panel settings are ignored.
If the record and playback pad modes are different, pad on/off events will not be
reproduced.
If parameter changes are memorized using the Voice Registration, Panel Regis-
tration, or Super Styleplay features during recording, only those parameters that
can be recorded on the current track will be memorized.
The time signature cannot be changed once a song has been recorded.
RECORD DELETE EDIT
p r f
The upper markings on the track buttons apply when the SEQUENCER mode is
engaged (1 through 7, and ACCOMP.). The lower markings when the CUSTOM
ACCOMPANIMENT PROGRAMMER described on page 15 is operating.
If you are adding new material to tracks that have already been recorded, the
[ r ] and [ f ] buttons can be used at this point to move to any measure number
from which you want to begin recording. The [ r ] and [ f ] buttons will not
function once recording has been started.