Washing Procedure; Fuzzy Course; Soak Course; Speedy Course - Samsung WA200 Owner's Instructions Manual

WASHING PROCEDURE

Before starting washing, check the following;
Connect the water supply hose to the water tap. Leave a tap open.
Plug the power cord in. Make sure to lay down the drain hose.(In case no drain pump)
Put the laundry into the washer and add detergent,too.
Be careful not to overload. Use right detergent for the fabrics you are washing.

FUZZY COURSE

Selects the best washing course
automatically.
1.
Press the POWER Button to"ON".
POWER
2.
Press the START/HOLD button.
Water level is selected automatically.
Washing,rinsing, and spinning follow.
If you want to pause, press the START/HOLD
button again.You can change the course when paused.
START/HOLD
3.
Close the lid.

SPEEDY COURSE

1.
Press the POWER button to "ON".
POWER
2.
Press the COURSE select button twice.
FUNCTION
3.
Press the START/HOLD button
Water level is selected automatically.
Washing, rinsing, and spinning follow.
If you want to pause, press the START/HOLD button
again.You can change the course when paused.
START/HOLD
4.
Close the lid.
5
Because washing is speedy, it is
good for light or less stained laundry.
The laundry is soaked in water so that the

SOAK COURSE

dirt can be eliminated completely.
1.
Press the POWER button to "ON".
POWER
2.
Press the FUNCTION select button once.
FUNCTION
3.
Press the START/HOLD button
Water level is selected automatically.
Washing,rinsing, and spinning follow.
If you want to pause, press the START/HOLD
button again.You can change the course when paused.
START/HOLD
4.
Close the lid.