Positioning The Drain Hose - Samsung F1213J Owner's Instructions Manual

Installing the Washing Machine
Connecting the water supply hose
The water supply hose must be connected to the washing machine at
one end and to the water faucet at the other. Do not stretch the water
supply hose. If the hose is too short and you do not wish to move the
water faucet, replace the hose with a longer, high pressure hose.
To connect the water supply hose:
1. Take the L-shaped arm fitting for the
cold water supply hose and connect to
the cold water supply intake on the
back of the machine. Tighten by hand.
2. Connect the other end of the cold water supply hose to your sink's
cold water faucet and tighten it by hand. If necessary, you can
reposition the water supply hose at the washing machine end by
loosening the fitting, rotating the hose, and retightening the fitting.
Option:
1. Take the red L-shaped arm fitting for the hot water supply
hose and connect to the red hot water supply intake on the
back of the machine. Tighten by hand.
2. Connect the other end of the hot water supply hose to your
sink's hot water faucet and tighten it by hand.
3. Use a Y-piece if you only want to use cold water.

Positioning the drain hose

The end of the drain hose may be positioned in three ways:
Over the edge of a sink
The drain hose must be placed at a
height of between 60 and 90 cm. To
keep the drain hose spout bent, use
the supplied plastic hose guide.
Secure the guide to the wall with a
hook or to the faucet with a piece of
string to prevent the drain hose from
moving.
ln a sink drain pipe branch
The drain pipe branch must be above the sink siphon so that the end
of the hose is at least
60 cm above the ground.
ln a drain pipe
Samsung recommends that you use a 65 cm high vertical pipe;
it must be no shorter than 60 cm and no longer than 90 cm.
4