Power Cord; On/Off Switch; Power Control - Samsung VC-8916VN Manual

ASSEMBLING THE VACUUM-CLEANER READY FOR USE
1) Connect the suction hose to the suction tube.
OPTION
OPTION :
Connect the suction tubes together.
3) Connect the nozzle to the suction tube.
5) Connect the body connector to the body of the
cleaner.
2) Adjust the suction tube(depending on model).
EXTENDING : Holding the narrow part of
the telescopic tube with one
hand, push the handle in the
opposite direction with your
other hand.
SHORTENING : Holding the narrow part of
the telescopic tube with
one hand, pull the handle
towards it using the other hand.
NOTE :
Adjustable telescopic tube is not
available with all models.
4) Open the hose connection cover.
EN-4
1) PULLING OUT : The power cord is long enough to
drawn out for convenience.
2) REWINDING : When you have finished cleaning,discon-
nect the plug from the electrical outlet
and simply press the cord rewind button
lightly with your toe.
NOTE :
When removing the power cord from the electrical outlet,grasp the plug,not the cord.
You can start or stop your vacuum cleaner by pressing the
on/off switch lightly with your toe.

POWER CONTROL

The vacuuming power can be adjusted to suit any situation with electrical power control.
MIN = For delicate fabrics, e.g. net curtains.
ECO = Economy setting for normally soiled carpets.
MAX = For hard floors and heavily soiled carpets.
1) For slider control types
Slide the controller to upwards or downwards to adjust the power output.
Model with controller on the body of cleaner
2) For button control types
Press (+)button to heighten the power.
Press (-)button to lower the power.
Model with controller on the body of cleaner

POWER CORD

ON/OFF SWITCH

(VARIABLE CONTROL TYPE ONLY)
Model with controller on the handle
Model with controller on the handle
EN-5