Replacing The Dustbag; Park Position - Samsung VC-5953 Operating Instructions Manual

DJ68-00159F(0.0) 5/14/03 2:41 PM
Located on the top rear side of the vacuum-cleaner, there is a
nozzle support that can be used to park the nozzle during
pauses in cleaning.
TRANSPORTING AND STORING THE VACUUM CLEANER
For easy storage and transportation, this vacuum cleaner has
a clip system built onto the body, which will keep the tube,
hose and nozzle in a vertical position.
1) To open the dust cover of the dust bag com-
partment, press the clamper upwards.(The
clamper is located at the front of the dust cover)
3) After removing the used dust bag, insert the
cardboard bag collar of the new dust bag into
its original position.
After using, if the cloth filter bag is full of dust, clean the cloth filter bag and use it again.
MAINTENANCE OR REPLACEMENT OF THE FILTERS
INLET FILTER
To protect the motor, your cleaner features a secondary filter at the front of the motor in the dust
compartment. Do not allow the filter to become clogged. Suction power reduction or motor damage may
result. After cleaning the secondary filter attach it in place.
SECONDARY FILTER
Page 7
REPLACING THE DUST BAG
2) Remove the dust bag from the cleaner.
4) Press the dust cover down gently until the
clamper relocks.
SECONDARY FILTER
6

PARK POSITION

FOR CLOTH FILTER BAG