Playing A Cassette; Adjusting Picture Alignment Automatically; Adjusting Picture Alignment Manually; Intelligent Picture Control - Samsung SV-251B Instruction Manual

01823B SV-657B/XEU-GB3 8/28/02 11:19 AM

Playing a Cassette

GB
This function allows you to play back any pre-recorded cassette.
2
3
REC MENU
OK

Adjusting Picture Alignment Automatically

(SV-651B/SV-651I/SV-255B/SV-251B/SV-251I Only)
The Picture Alignment feature enables you to optimize the tape
position automatically to obtain the best possible picture.
A.TRK IPC INPUT
When noise bars or streaks appear during playback, adjust picture
alignment by pressing the A.TRK button.
REPEAT
Result:
AUDIO DISPLAY
TRK PROG

Adjusting Picture Alignment Manually

(SV-651B/SV-651I/ The Picture Adjustment feature allows you to adjust the alignment
SV-225B/SV-251B/
manually to obtain the best possible picture.
(SV-657B/SV-655B)
SV-251I)
VCR INPUT A.TRK IPC
When noise bars or streaks appear during playback, adjust alignment
REPEAT manually by pressing the PROG/TRK ($ or ❷) / TRK (
until the picture is clear and stable.
DISP./
DIO
L PROG/TRK TRK PROG
Result:
30
Page 30
1
Switch on both the television and your VCR.
2
Insert the video cassette to be played. If the safety tab on the
❿
cassette is intact, press ll.
Otherwise, the cassette is played automatically.
When a cassette is loaded, the tape position is optimized
automatically to reduce disturbance (Digital Auto Tracking).
When playing a cassette, if the end of the tape is reached,
the cassette is rewound automatically.
NTSC tapes can be played back but cannot be recorded
with this VCR.
3
To... Then press...
Stop the playback (STOP).
Eject the cassette (EJECT).
The tracking bar appears.
The picture is automatically adjusted.
The tracking bar disappears when digital auto tracking has
been completed.
or
The tracking bar appears.
The image is adjusted.
The tracking bar disappears when you release the button.

Intelligent Picture Control

The Intelligent Picture Control Feature allows you to adjust the
sharpness of the image automatically, according to your own
preferences.
1
During playback, press the MENU button on the remote control.
Result: The programming menu is displayed.
2
Press the corresponding ,
$ ❷
USER SET option.
3
Press the OK button to select this option.
Result: The USER SET menu is displayed.
4
Press the corresponding
$
selected.
5 Press the ❿!button to select the IPC (intelligent picture control)
option.
When intelligent picture control mode is
of the image is adjusted automatically.
6
To adjust the sharpness manually, press the
IPC mode OFF .
7 Press the ➛ or ❿ buttons until the picture is displayed according to
your preferences.
If you do not press a button within ten seconds, the
PICTURE menu disappears automatically.
8 On completion, press the MENU button again.
Intelligent Picture Control
SV-251B/SV-251I Only)
1 During playback, press the IPC button.
Result: The PICTURE menu is displayed.
2
Press the button to turn the IPC (Intelligent Picture Control)
❷
option ON and OFF .
When Intelligent Picture Control mode is
of the image is adjusted automatically.
3
To adjust the sharpness manually, select Intelligent Picture
Control mode OFF .
The horizontal picture adjusting appears.
4 Press the ➛ or ❿ buttons until the picture is displayed according to
your preferences.
) buttons
If you do not press a button within ten seconds, the
PICTURE menu disappears automatically.
5
On completion, press the IPC button again.
(SV-657B/SV-655B/SV-651B/SV-651I)
OPTIONS
OSD
TAPE SELECT
or ➛, ❿ buttons to select the
COLOUR SYSTEM
FORMAT 16:9
NICAM
ECO. MODE
IPC
❿
$ ❷
or buttons, until the IPC option is
❷
(SV-255B/SV-251B/SV-251I)
ON , the sharpness
OPTIONS
OSD
TAPE SELECT
button to turn the
❷
COLOUR SYSTEM
ECO. MODE
IPC
❿
$ ❷
(SV-651B/SV-651I/SV-255B/
CLR/RST
A.TRK
ON , the sharpness
AUDIO
TRK
** PICTURE
IPC
SOFTEN
--------
➛❿
GB
:ON
:E180
:AUTO
:AUTO
:ON
:OFF
:ON
END: MENU
:ON
:E180
:AUTO
:OFF
:ON
END: MENU
F.ADV INDEX
IPC INPUT
REPEAT
1
DISPLAY
PROG
**
: OFF
SHARPEN
*
-----
ON/OFF:
❷
31