Selecting The Cassette Type; Selecting The Recording Speed; Nicam (Sv-657B/Sv-655B/Sv-651B/Sv-651I Only) - Samsung SV-251B Instruction Manual

01823B SV-657B/XEU-GB2 8/28/02 11:16 AM

Selecting the Cassette Type

GB
If you wish to use the tape counter to display the time remaining on
(SV-657B/SV-655B/SV-651B/SV-651I)
a cassette, you must indicate the type of cassette inserted.
OPTIONS
OSD :ON
TAPE SELECT :E180
COLOUR SYSTEM :AUTO
FORMAT 16:9 :AUTO
NICAM :ON
ECO. MODE :OFF
IPC :ON
❿ END: MENU
" ❷
(SV-255B/SV-251B/SV-251I)
OPTIONS
OSD :ON
TAPE SELECT :E180
COLOUR SYSTEM :AUTO
ECO. MODE :OFF
IPC :ON
❿ END: MENU
" ❷

Selecting the Recording Speed

You can record a cassette at two different speeds:
Type Recording Time (in SP)
E-180 180 mins. or 3 hours
In Long Play modes:
E-240 240 mins. or 4 hours
E-260 260 mins. or
4 hours and 20 mins.
E-300 300 mins. or 5 hours
To record a cassette...
OK In standard play mode
In long play mode
SPEED DUB TV/VCR TIMER
22
Page 22
1
Press MENU on the remote control.
Result: The programming menu is displayed.
2 or ➛, ❿ buttons to select the
Press the corresponding ,
" ❷
USER SET option.
3
Press the OK button to select this option.
4
Press the corresponding or buttons, until the
" ❷
SELECT option is selected.
5 Press the ➛ or ❿ buttons as many times as required, until the
correct cassette length is displayed.
E180 E240
E 300 E260
6
Press MENU twice to exit the menu.
SP (Standard Play)
LP (Long Play)
Each cassette lasts twice as long
The recording is of a slightly lower quality
Press the SPEED button on the
remote control, until...
SP is displayed.
LP is displayed.
NICAM (SV-657B/SV-655B/SV-651B/SV-651I Only)
NICAM programmes are divided into 3 types. NICAM Stereo,
NICAM Mono and Bilingual (transmission in another language).
NICAM programmes are always accompanied by a standard mono
sound broadcast and you can select the desired sound.
Please refer to page 33.
1
Press MENU on the remote control.
Result: The programming menu is displayed.
2 Press the corresponding ,
" ❷
USER SET option.
TAPE
3 Press the OK button to select this option.
Result: The USER SET menu is displayed.
4
Press the corresponding or
"
is selected.
5 Press ➛ or ❿, until...
To...
Mono mode OFF is displayed.
OFF: Only set at this position to record the
standard mono sound during a
NICAM broadcast if the stereo sound
is distorted due to inferior reception
conditions.
NICAM mode ON is displayed.
ON: Normally set at this position.
6
On completion, press MENU twice to exit the menu.
OPTIONS
PROG OPTIONS
CLOCK BONUS
USER SET
or ➛, ❿ buttons to select the
➛❿!! OK
" ❷!!
OPTIONS
buttons, until the NICAM option OSD
❷
TAPE SELECT
COLOUR SYSTEM
FORMAT 16:9
NICAM
ECO. MODE
IPC
❿
" ❷
GB
INSTALL
LANG
END: MENU
:ON
:E180
:AUTO
:AUTO
:ON
:OFF
:ON
END: MENU
23