Customizing The Picture Settings - Samsung CS-32500HEXA Owner's Instructions Manual

Customizing the Picture Settings

TV Picture
œ œ Dynamic
Mode
Size : 16:9
Scan Mode : Natural
Digital NR : On
DNIe Demo : Off
† †
More
Move Enter
TV Mode
œ œ Standard
Mode
Contrast : 50
Brightness : 50
Sharpness : 50
Color : 45
† †
More
œ œ √ √
Move Adjust
TV Mode
Mode : Standard
œ œ 50
Contrast
Brightness : 50
Sharpness : 50
Color : 45
† †
More
œ œ √ √
Move Adjust
Contrast
TV Mode
... ...
More
œ œ Normal
Color Tone
Reset
œ œ √ √
Move Adjust
TV Mode
... ...
More
Color Tone : Normal
Reset
œ œ √ √
Move Adjust
English - 22
Your television has several settings which allow you to control the
picture quality.
√ √
1
Press the MENU (
Result:
Press the ▲ or ▼ button to select Picture.
2
Result:
Return
3
Press the ENTER (
Result:
√ √
Select the required picture mode by pressing the œ or √ button
4
repeatedly.
Result:
Return
Press the ▲ or ▼ button to select the option (Contrast,
5
Brightness, Sharpness, Color, or Tint-NTSC only) to be
adjusted. Press the œ or √ button. These options are for each
mode adjusted (Dynamic, Standard, Movie, or Custom).
√ √
Result:
6
Press the MENU (
Result:
Return
Press the ▲ or ▼ button to select Color Tone. Select the
7
required option by pressing the œ or √ button repeatdly.
50
Result:
To return to the factory defaults, select Reset by pressing the ▲ or
8
▼ button. Press the œ or √ button.
The reset function is set for each mode (Dynamic, Standard,
√ √
Movie, or Custom).
√ √
Result:
Return
➢
√ √
Return
) button.
The main menu is displayed.
The options available in the Picture group are
displayed.
) button.
The Mode is selected.
The following picture mode are available:
Dynamic - Standard - Movie - Custom
The horizontal bar is displayed. Press the œ or √
button until you reach the optimal setting.
) button.
The available options are displayed again.
The following color tones are available:
Warm2 - Warm1 - Normal - Cool1 - Cool2
The previously adjusted settings will be reset to the
factory defaults.
◆ The television has an "automatic degaussing" system
that is activated if magnetic interference is present.
To degauss the television screen, switch power off by
pressing the " " (On/Off) button on the front panel.
(Refer to "Automatic Degaussing to Remove Color
Patches" on page 45.)