Selecting The Sound Mode (Depending On The Model) - Samsung CS-32500HEXA Owner's Instructions Manual

Selecting the Sound Mode
English - 30
(depending on the model)
The "DUAL I-II" button displays/controls the processing and output
of the audio signal. When power is switched on, the mode is
automatically preset to either "DUAL-I" or "STEREO", depending on
the current transmission.
Type of broadcast
Regular broadcast
(Standard audio)
Regular +
NICAM Mono
NICAM
Stereo
NICAM Stereo
NICAM Dual-I/II
Regular broadcast
(Standard audio)
A2
Bilingual or Dual-I/II
Stereo
Stereo
➢
◆ If the receiving conditions deteriorate, listening will be
easier if the mode is set to the MONO.
◆ If the stereo signal is weak and an automatic switching
occurs, then switch to the MONO.
◆ When receiving a mono sound in the AV mode, connect
to the "AUDIO-L" input connector on the panel (front or
side). If the mono sound comes out only from left
speaker, press the DUAL I-II button.
On-screen indication
MONO (Normal use)
MONO ↔ MONO
NICAM (Normal)
STEREO ↔ MONO
NICAM (Normal)
→ DUAL- → MONO
I II
DUAL-
NICAM NICAM (Normal)
MONO (Normal use)
↔ DUAL-
I II
DUAL-
STEREO ↔ MONO
(Forced mono)