Changing the Picture Standard
You can select the type of picture which best corresponds
to your viewing requirements.
1
Press the MENU button to display the menu.
Press the ENTER button to select Picture.
Press the ENTER button again to select Mode.
4
Select the required mode by pressing the ▲ or ▼ button,
then press the ENTER button.
Available modes: Dynamic, Standard, Movie
➢
The settings values may vary depending on the input
source.
5
Press the EXIT button to exit.
➢
Choose Dynamic for viewing the TV during the day or
when there is bright light in the room.
Choose Standard for general TV watching mode.
Choose Movie when viewing the movie.
1
Press the ▲ or ▼ button to select Picture Mode.
Press the ◄ or ► button to select the required option.
Customizing the Picture Settings
Your television has several setting options that allow you
to control the picture quality.
1
Press the ENTER button again to select Mode.
4
Select the required mode by pressing the ▲ or ▼ button,
then press the ENTER button.
Available modes: Dynamic, Standard, Movie
5
button.
Cell Light - Contrast - Brightness - Sharpness - Colour - Tint(G/R)
➢
In TV, AV, S-Video modes of the PAL system, you cannot use the Tint Function.
➢
In PC mode, you can only make changes to Cell Light, Contrast, and Brightness.
Press the ◄ or ► button until you reach the optimal setting.
English -
Mode
Cell Light
Contrast
Brightness
Sharpness
Colour
Tint (G/R)
Detailed Settings
Mode
Cell Light
Contrast
Brightness
Sharpness
Colour
Tint (G/R)
Detailed Settings
TOOLS
Device List
Picture Mode
◄
Standard
Sound Mode
:
Custom
Sleep Timer
:
Off
:
:
:
Colour
Tint (G/R)
Detailed Settings
Picture Options
: Standard
►
: 7
: 95
: 45
: 50
: 50
: G50/R50
:
Dynamic
Standard
: 7
Movie
: 80
: 45
: 50
: 50
: G50/R50
►
:
►
: 95
: 45
: 50
: 50
: G50/R50