Troubleshooting Guide - Samsung Wingo S-P2450 Instruction Manual

Troubleshooting Guide

GB
Problem
M
Power is not
A
turned on.
I
N
S
Y
Sound is not
S
T heard.
E
M
FM channels cause
noises.
T
U
N
AM(MW)/LW
E
broadcasts are not
R
received.
AM(MW)/LW
channels cause
noises.
C
CD player doesn't
D
start.
P
L
A
Y
Pieces of sound or
E
music are skipped.
R
If the power cannot
be turned on or no
operations can be
performed:
M
If the buttons on the
P
set do not work:
3
If no playback of
P
music is performed
L
even when the Play
A
button is pressed in
Y
the MP3 mode:
E
If the download of
R
MP3 files cannot be
performed: Check
the power is
properly supplied.
C
Abnormal message
O
appears on the
M
panel.
M
O
N
MP-9
Checks
Has the power supply plug been correctly
connected to an electric outlet?
Did you select what you want to listen
to with the Function button?
Have you set volume to the lowest
level?
The noises may be caused by
automobiles or autobicycle engines.
Input sensitivity of the antenna port is
weak.
Did you connect tightly the antenna to
the antenna port?
Did you connect the AM(MW)/LW antenna?
Are there any electronic appliances (TV,
VCR, etc.) around the AM(MW)/LW
antenna?
Did you insert CD Player correctly?
Did you insert the disk in correct
direction?
Did you select functions correctly?
Did Pause appear on the display panel?
Are there any dusts or aliens on the disk
surface?
Are there any scratches on the disk
surface?
Is the effect sounds too high?
Check the charge level of the general or
rechargeable batteries loaded in the set.
Check the polarity (+, -) of the loaded
batteries.
Check if the Hold function is selected.
Check that MP3 files are stored in the
memory of the set.
Check the connection of the PC and the set.
Does the display panel operate
abnormally while the system output
is normal?
Remedy
Connect the plug of power supply to
an electric outlet.
Select a function that you want with
the Function button.
Control the volume at proper level.
Install a FM outdoor antenna at a place
far from the roads.
Install a FM outdoor antenna toward a
direction with good reception sensitivity.
Connect the antenna to a correct port.
Install an AM(MW)/LW antenna.
Turn off the power of electronic appliances.
Then, if the noise decreases, install the
AM(MW)/LW antenna at a place far from the
appliances.
Insert CD Player correctly.
Correctly insert the disk to the disk
compartment.
Press the Function button to select 'CD'.
Press the (Play) button once more.
Wipe out the surface of the disk.
Replace the disk with another one.
Reduce the level of volume.
Press the Preset EQ button for five
seconds while the power is turned on.
Then, the display panel will be reset.
SAMSUNG AUDIO