Setting The Clock - Samsung Wingo S-P2450 Instruction Manual

 
GB




On/Off – Check

Function /Tuning Mode
Tuning
Volume
PRESET EQ
Win-1

Setting the Clock

1
On/Standby
Timer
Mono/ST
2
Function
Timer/Clock Band
Sleep
Down Tuning
Phones 4,6
Volume
SNOOZE
Open/Close
MP3
CD Synchro Delete
3,5,7
PTY RDS Display
PROG./Set
Repeat
Up
P. Sound
4,6
Your system is equipped with a clock which allows you to turn
your system on and off automatically. You should set the clock:
When you purchase the audio system
After a power failure
After unplugging the unit
Remember to reset the time when the clock changes from
winter to summer time and vice versa.
For each step, you have a few seconds to set the required options.
If you exceed this time, you must start again.
1
Switch the system on by pressing On/Standby.
2
Press Timer/Clock twice.
Result: CLOCK is displayed.
3
Press Prog./Set.
Result: The hour flashes.
4
To...
Increase the hours
Decrease the hours
5
When the correct hour is displayed, press Prog./Set.
Result: The minutes flash.
6
To...
Increase the minutes
Decrease the minutes
7
When the correct time is displayed, press Prog./Set.
Result: The clock starts and is displayed, even when the system is in
standby mode.
You can display the time, even when you are using another
function, by pressing Timer/Clock once.
Press...
Press...
SAMSUNG AUDIO