Connecting The Am Aerial; Connecting The Fm Aerial - Samsung Wingo S-P2450 Instruction Manual

Connecting the AM Aerial

The AM aerial (for long and medium waves) can be:
• Placed on a stable surface
• Fixed to the wall (you must first remove the base)
1
To connect a wire, push the terminal tab downwards and hold it in position.
2
Insert the wire, up to the plastic sheathing, in the hole.
3
Release the tab
FM

Connecting the FM Aerial

How to connect a COAXIAL TYPE aerial.
• Connect a 75Ω antenna to the FM antenna terminal.
• Plug the connector on the FM aerial supplied into the coaxial socket (75Ω) marked FM on the rear of the system.
• Follow the instructions given on Page Win-8 to tune into a radio station, and determine the best position for the aerial.
• If reception is poor, you may need to install an outdoor aerial.
To do so, connect an outdoor FM aerial to the FM socket on the rear of the system using a 75Ω coaxial cable (not supplied).
SAMSUNG AUDIO
AM
FM FM FM
FM AERIAL
75Ω COAXIAL CABLE
(supplied)
(not supplied)
GB
10