Connecting To Your Pc; To Delete Presets; Setting Fm Radio - Samsung YP-K3 Service Manual

Listening to FM Radio
Setting FM Presets
To manually set Presets
1
Manual Mode Tap [
2
Tap [ ].
Go to Preset ..
3
Add Preset
Tap [
Auto Preset
FM Sensitivity
The selected frequency will be added to the preset list. A maximum of
30 preset numbers are added to the list in sequential order.
4
To set a preset for other frequencies, follow 1-3 steps above.
If a frequency that you try to add already exists in the list, you will see <This preset already exists.> and
the selected frequency is not added to the preset list.
NOTE
To search for presets in Preset mode
Preset Mode
Tap [ ] in <Preset Mode>.
The preset number is selected and you can listen to the stored radio
frequency.
If you want to check the preset list in <Preset Mode>, tap [
NOTE
Listening to FM Radio

To Delete Presets

1
Delete Preset
Tap [ ] in <Preset Mode>.
89.1MHz
89.2MHz
2
89.3MHz
Tap [
89.4MHz
The preset frequencies will appear.
3
Tap [
and then tap [
The confirmation window will appear.
4
Tap [
The selected preset will be deleted.
5
To select and delete other preset numbers, follow 1-4 steps
above.
Listening to FM Radio

Setting FM Radio

To set FM Sensitivity
1
Manual Mode
Tap [ ] in FM Radio mode.
2
Go to Preset ..
Tap [
Add Preset
Auto Preset
The FM Sensitivity menu appears.
FM Sensitivity
3
Tap [
You can select from <High>, <Middle> and <Low>.
The higher FM sensitivity is, the more frequencies that can be received.
3-4
(Continued)
] to select the desired frequency in <Manual Mode>.
] to select <Add Preset> and then tap [
] to select <Preset List> and Tap [
] to select <Delete Preset> and then tap [
] to select the preset frequency you want to delete
].
] to select <Yes> and then tap [ ].
] to select <FM Sensitivity> and then tap [
] to select the sensitivity and then tap [
3. PC Connection
Loading Your Desired File

Connecting to your PC

Before you start!
Use the USB Cable provided when connecting the player to your PC.
].
1
Connect the USB cable to the USB port (
2
Connect the other end of the USB cable to the USB Connection Port on the
bottom of the player.
PC Requirements
The PC system must meet the following minimum specifications:
Pentium 300MHz or higher
]. DirectX 9.0 or higher
100MB of free hard disc space
Windows Media Player 10.0 or higher
If you connect the player through a USB hub, the connection may be unstable. Please connect the
player to your PC directly.
CAUTION
If you connect the player to your PC in the low battery condition, the player automatically checks
the battery status and charges itself for several minutes before connecting to your PC.
].
].
].
2
) on your PC.
Windows 2000/XP
USB Port 2.0
CD Rom Drive (2X or higher)
Resolution 1024 X 768 or higher
Samsung Electronics
1