How To Operate Memory Cooking; How To Operate Double Quantity Pad - Samsung MJ26A6093 Owner's Instructions & Cooking Manual

5. Repeat steps 3 and 4 for I or II stage memory programming.
6. Hold down PROGRAM LOCK (
press PROGRAM ( ) pad. Hold together for 2
sec once again.
Result : PROG indicator and memory number
indicator blink 3 times in the digital
display with a beep sound. And then the display goes
blank.
Caution: Be sure to press the pads firmly in the right position.
7. When you want to program more, repeat the procedures above again.
Memory programs are available up to 50 items.
Make sure the unit is properly programmed.
After programming is finished, all you have to do for memory cooking
is to press the NUMBER pad. Then the selected memory program
automatically starts cooking.
You can not set up the same POWER LEVEL or DEFROST.
It operates as setting up sequence.
) and then

HOW TO OPERATE MEMORY COOKING

After having finished memory programming, just press the NUMBER pad
of the memory number you want to select. The oven will automatically start
heating according to the pre-programmed cooking time and power level.
1. Make sure the oven is plugged into a properly earthed electrical outlet.
2. Open the door.
The oven lamp will be turned on.
3. Put the food into a suitable container, place it in the centre of the oven
and then close the door securely.
Result : The oven lamp will go off.
4. Press NUMBER pad.
Result : The selected memory program
automatically starts heating. But,
NUMBER pad 1, 2, 3 operate after
2 seconds.

HOW TO OPERATE DOUBLE QUANTITY PAD

1. Press the Double Quantity pad.
2. Press the desired memory NUMBER pad.
Result : Cooking time which was multiplied
by the preset factor appears in the
display and cooking starts with time
digits counting down.
13