Advertisement
Available languages
Available languages
OPERATING THE RECEIVER
3. Parental Lock
This "Parental Lock" feature sets viewing restrictions
and prevents unauthorized access to your DSR 9500A
through the PIN (Personal Identification Number),
which is a 4 digit number.
(The factory preset PIN code : 0000)
On selecting this menu, you will have two options:
to set lock for any desired channel and to change
your PIN value.
Enter PIN code.
If you have not entered your own PIN code then
the PIN code 0000 applies, which was set at the factory.
3.1 Set Channel Lock
Select the channel by pressing
/
,
When you press the TV/RADIO key, TV list and Radio list
are toggled.
Select the channel lock by pressing Red (
Press
key for confirmation.
This will lock the channel. Whenever you need to view
the channel, you will have to enter the PIN at the request
window.
To cancel the lock :
Press Red (
) key again in order to cancel the lock.
/
, / .
) key.
D
I
G
I
T
A
L
GB-24
3.2. Change PIN Code
To change the PIN code, select the second option "Change PIN Code".
This will take you to the following menu:
In this option, you need to enter the current PIN
code at the first cursor, and at the second cursor
enter the desired PIN code.
To confirm, you need to enter the new PIN code again.
Please remember the PIN code should be a 4 digit
numerical value.
THE FACTORY PRESET PIN CODE : 0 0 0 0.
N N o o t t e e
: If you forget the PIN Code, please refer to
the following instruction;
1. Press MENU Key on the RCU.
2. Select "System Setup".
3. Select "System Information".
4. Press "0000".
S
A
T
E
L
L
I
T
E
R
E
C
E
OPERATING THE RECEIVER
I
V
E
R
GB-25
Advertisement
Chapters
