Method 3 : Antenna + Dvd Recorder + External Decoder; Box + Tv; Step 3 : Other Type Of Connecting The Video; Output Cable - Samsung DVD-R100E Instruction Manual

Method 3 : Antenna + DVD
Recorder + external decoder

box + TV

If you connect external decoder box to DVD recorder,
you can record scrambled channels received through
the built-in TV tuner in DVD Recorder.
1
3
2
1. Connect RF antenna cables as shown.
2. Connect the AV1 connector on this recorder to the
SCART AV connector on TV using a SCART cable.
3. Connect the AV2 connector to a SCART AV
connector on decoder box.
4. Set channel decoding function on using on-screen
menu. Refer to page 27.
Step3 : Other type of
connecting the Video

output cable

There are several ways to output video signal not using
scart cables. Select one of the following video
connecting that best suits you below.

Method 1 : Connecting to a Composite Video output

Method 2 : Connecting to an S-video output jack

S-Video Output Modes
S-Video output are available only if your TV supports
S-Video input. If S-Video output does not work, check
the TV connections and the TV input selection
settings. (For information on how to connect to a TV,
see pages 15 to 16.)
4
Method 1 : Connecting to a
Composite Video output jack
Connect a video(yellow) cable between the VIDEO
(yellow) OUT jack on DVD Recorder and VIDEO
(yellow) IN jack on the TV (or AV amplifier).
You will enjoy regular quality images.
Connect audio cables( white and red) between the
ANALOG AUDIO OUT jacks on the DVD Recorder
and AUDIO IN jacks on TV( or AV amplifier).
(See page 18)

jack

17
English -