Table of Contents
Advertisement
6-00819S-XSA_75-92_REC
The numbers next to each TV programme
I
listing in the magazines or newspapers
NOTE
are G-Code numbers, which allow you to
programme your HDD & DVD
RECORDER instantly with the remote
control. Enter the G-Code for the
programme you wish to record.
G-Code is a trademark of Gemstar
I
Development Corporation. The G-Code
system is manufactured under licence
from Gemstar Development Corporation.
G-Code Extended
To prevent delays or overruns, HDD & DVD RECORDER has
a function called G-Code Extened allowing you to extend the
recording time by up to 60 minutes.
Using the TIMER button
1
With the unit in Stop mode/Playback mode, press
the TIMER button. The Programme screen is
displayed.
HDD
Title
Music
Photo
Programme
Setup
Using the MENU button.
• With the unit in Stop mode/Playback mode, press
the MENU button.
• Press the ...† buttons to select Programme,
then press the OK or √ button.
92 - English
6/9/05
2:52 PM
Page 92
Programme
√ √
G-Code
√ √
Timer Record
√ √
G-Code Extended
: Off
MOVE
SELECT
RETURN
EXIT
2
Press the ...† buttons to select G-Code Extended,
then press the OK or √ button.
HDD
G-Code
Title
Timer Record
Music
G-Code Extended
Photo
Programme
Setup
MOVE
SELECT
3
Press the ...† buttons to select the G-Code
Extended time, then the press OK or √ button.
4
Press the MENU button to exit the menu.
Programme
√ √
√ √
Off
√ √
: Off
10
20
30
40
50
60
RETURN
EXIT
Advertisement
Table of Contents
