Table of Contents
Advertisement
10-00819S-XSA_126-131_Reference
Remote Control Unit
The remote control doesn't work.
Point the remote control at the remote
Checkpoint 1
control sensor on your HDD & DVD
RECORDER. Allow for proper
distance. Remove obstacles between
your HDD & DVD RECORDER and
the remote control.
Check whether the batteries are
Checkpoint 2
empty.
Check whether TV control button is
Checkpoint 3
selected or not.
Other
I forgot my password for parental supervision.
Press and hold the
Checkpoint 1
front panel of the Recorder for more
than 5 seconds with no disc in the
unit. All settings including the
password will revert to the factory
settings. Do not use this unless
absolutely necessary. (Note that this
function is possible only when no disc
is inserted.)
Is it possible to change a subtitle and an audio
signal on a recorded disc?
A recorded disc is played with only
Checkpoint 1
the subtitle and the audio signal
which were selected during recording.
6/9/05
1:57 PM
Page 129
Other problems.
Checkpoint 1
Checkpoint 2
Checkpoint 3
button on the
Read the table of contents and then
find and read the section describing
your problem, follow the instructions
given.
Plug your HDD &DVD RECORDER
off and on.
If the problem still persists, contact a
nearby Samsung service centre.
English - 129
Advertisement
Table of Contents
