Table of Contents
Advertisement
3-00819S-XSA_24-43_SETUP
Plug & Auto Setup
Your HDD & DVD RECORDER will automatically set itself up
when it is plugged in for the first time. TV stations and clock
will be stored in memory. The process takes a few
minutes. Your HDD & DVD RECORDER will then be ready for
use.
1
Connect the RF cable as indicated on page 19.
(Connecting Your HDD & DVD RECORDER to the
TV Using the RF Cable and Audio/Video Cable.)
2
Plug the HDD & DVD RECORDER into the mains.
"AUTO" in the front panel display flickers.
Press a number button to select the language.
3
Press the OK button to start the auto setup.
4
Check antenna and TV cable connection.
6/9/05
2:00 PM
Page 25
Press 1 for English
Touche 2 pour Français
Drücken Sie 3 Für Deutsch
Pulse 4 para Español
Premere 5 per Italiano
Druk op 6 voor Nederlands
Auto setup will be started.
Yes
No
Press the ...† buttons to select system of
5
Broadcast in your country, then press the OK
button.
In Australia, select SYSTEM B/B.
In New Zealand, select SYSTEM B/G.
Please select your system
SYSTEM B/B (Australia)
SYSTEM B/G (New Zealand)
6
Auto channel scan will be started.
Channel Scan
Scanning...
•
The number of stations automatically stored by the
HDD & DVD RECORDER depends on the number of
stations that it has found.
Auto Channel Scan is completed. In 3~4 seconds,
7
you will see Clock Setting Menu. If you want to
start Clock Setting immediately, Press OK button.
Auto channel scan completed successfully.
OK
10%
English - 25
Advertisement
Table of Contents
