Table of Contents
Advertisement
10-00819S-XSA_126-131_Reference
Video
The disc revolves, but no image or bad quality
images are displayed.
Be sure that the Video Setting is
Checkpoint 1
properly set. (See pages 38~39)
Check whether there is damage to or
Checkpoint 2
any foreign material on your disc.
Some low quality discs may not play
Checkpoint 3
properly.
If scenes change from dark to bright
Checkpoint 4
suddenly, the screen may shake
vertically temporarily, but this is not a
fault.
Sound
No sound.
Are you watching a programme in
Checkpoint 1
slow or skip mode?
If you are playing a programme at a
speed other than normal speed,
sound will not be heard.
Check the connections and settings.
Checkpoint 2
(See pages 21~22, 37)
Checkpoint 3
Check whether the disc is damaged.
Clean the disc, if necessary.
Checkpoint 4
Check whether the disc is inserted
correctly with the label facing up.
No audio output.
Check whether you have selected
Checkpoint 1
the correct digital output options in
the Audio Output Options menu.
(See page 37)
128 - English
6/9/05
1:57 PM
Page 128
Checkpoint 1
Checkpoint 2
Checkpoint 1
Checkpoint 2
Timer Recording
Timer lamp flickers.
Check there is enough space in the
disc or HDD for recording.
Check whether the current disc is
recordable or not.
Make sure to check before the start
time of recording.
Timer recording does not work properly.
Re-check the recording time and the
end time settings again.
Recording will be cancelled if the
power is interrupted due to a power
failure or another similar reason
while recording.
Advertisement
Table of Contents
