Demonstration - Samsung VP-D99I Owner's Instruction Book

Advanced Recording

DEMONSTRATION

Demonstration automatically shows you the major functions that are included with your camcorder so that you may use
them more easily.
The DEMONSTRATION function may only be used in the CAM mode without a tape inserted in the camcorder.
The demonstration operates repeatedly until the DEMONSTRATION mode switched OFF.
1. Set the camcorder to CAM mode.
2. Press the MENU button.
The menu list will appear.
3. Move the MENU SELECTOR to highlight INITIAL.
4. Select DEMONSTRATION from the submenu and push the MENU SELECTOR.
5. To activate the DEMONSTRATION, set DEMONSTRATION ON.
Press the menu button to quit the menu.
The demonstration will begin.
6. To end the DEMONSTRATION, set the DEMONSTRATION to OFF.
Notes
The DEMONSTRATION function only works without a TAPE installed.
The DEMONSTRATION mode is automatically activated when the camcorder is left idle for more than 10 minutes after
switching to the CAM mode (no tape is inserted in the camcorder).
If you press other buttons (FADE, BLC, PHOTO, EASY) during the DEMONSTRATION mode,
the DEMONSTRATION stops temporarily and resumes 10 minutes later if you do not operate any other functions.
ENGLISH
CAM MODE
INITIAL CLOCK SET
CAMERA
WL. REMOTE
A/V
BEEP SOUND
MEMORY
SHUT. SOUND
VIEWER
DEMO
CAM MODE
INITIAL SET
CLOCK SET
WL.REMOTE
BEEP SOUND
SHUTTER SOUND
DEMONSTRATION
41 41