Eis (Electronic Image Stabilizer) - Samsung VP-D99I Owner's Instruction Book

Advanced Recording

EIS (Electronic Image Stabilizer)

The EIS function works in CAM mode only.
EIS (Electronic Image Stabilizer) is a function that compensates for any shaking or hand movement while holding the
camcorder (within reasonable limits).
It provides more stable pictures when:
Recording with the zoom
Recording a small object close-up
Recording and walking at the same time
Recording through the window of a vehicle
1. Set the camcorder to CAM mode.
2. Press the MENU button.
The menu list will appear.
3. Move the MENU SELECTOR highlight to CAMERA and push the MENU SELECTOR.
The sub menu list will appear.
4. Move the MENU SELECTOR to activate the EIS function, push the MENU SELECTOR.
The EIS menu is changed to ON.
If you do not want to use the EIS function, set the EIS menu to OFF.
5. To exit, press the MENU button.
Notes
It is recommended that you deactivate the shake compensation function when using a tripod.
If you use the EIS function, the picture quality may deteriorate.
While setting the EIS to ON, the WIDE, STROBE(DSE function) mode do not work.
ENGLISH
CAM MODE
INITIAL
CAMERA PROGRAM AE
WHT. BALANCE
A/V
MEMORY D.ZOOM
VIEWER EIS
DSE SELECT
MEMORY MIX
FLASH SELECT
CAM MODE
CAMERA SET
PROGRAM AE
WHT. BALANCE
D.ZOOM
EIS
DSE SELECT
MEMORY MIX
FLASH SELECT
47 47