Playback - Samsung VP-D352 User Manual

Playback

Tape Playback
The playback function works only in Player mode.
Playback on the LCD Screen
It is practical to view a tape using the LCD screen when in a car or outdoors.
Playback on a TV Monitor
To play back a tape, the television must be PAL compatible.
We recommend that you use the AC Power adapter as the power source for the Camcorder.
Connecting to a TV which has Audio/Video input jacks
1. Connect the Camcorder and TV with the Audio/Video cable.
The yellow jack: Video
The white jack: Audio(L)-mono
The red jack: Audio(R)
- If you connect to a monaural TV, connect the yellow jack
(Video) to the video input of the TV and the white jack
(Audio L) to the audio input of the TV.
You may use the SCART adapter. (optional)
2. Set the Power switch to PLAYER.
3. Set the Mode switch to TAPE. (VP-D353(i)/D354(i)/D355(i) only)
4. Turn on the TV and set the TV/VIDEO selector on the TV to Video.
Refer to the TV user's manual.
5. Play the tape.
Notes
You may use an S-Video (optional) cable to obtain better quality pictures if you have a S-Video
connector on your TV.
Even if you use an S-Video (optional) cable, you need to connect an audio cable.
If you connect the cable to the Audio/Video jack, you will not hear sound from the Camcorder's
speakers.
If only a mono audio input is available on the TV set, use the audio cable with the white jack
(Audio L).
Connecting to a TV which has no Audio and Video Input Jacks
1. Connect the Camcorder to your VCR with the
Audio/Video cable.
2. Connect a TV to the VCR.
3. Set the Power switch to PLAYER.
4. Set the Mode switch to TAPE. (VP-D353(i)/D354(i)/D355(i) only)
5. Turn on both the TV and VCR.
S-Video input Video input-Yellow
Audio input Camcorder
(left)-White
TV
Audio input
(right)-Red
6. Play the tape.
Audio/Video
Playback
S-Video
1. Connect a power source and set the Power switch to
PLAYER.
2. Set the Mode switch to TAPE.
(VP-D353(i)/D354(i)/D355(i) only)
3. Insert the tape you wish to play back.
4. Using the
wish to play back.
5. Press the
Note
The playback mode (SP/LP) is selected automatically.
If the VCR has an S-Video input terminal, you may use S-Video for better quality.
The S-Videoterminal transmits video only. Connect audio cables for sound.
If only a mono audio input is available on the TV set, use the audio cable with the
white jack (Audio L).
You can connect your Camcorder to a TV through a VCR.
The yellow jack: Video
The white jack: Audio(L) - Mono
The red jack: Audio(R)
Set the input selector on the VCR to Line.
Select the channel reserved for your VCR on the TV set.
You can play the recorded tape in Player mode.
/ (REW/FF) buttons, find the first position you
(PLAY/STILL) button.
The images you recorded will appear on the TV after a few seconds.
If a tape reaches its end while being played back, the tape will rewind automatically.
Video input-Yellow
S-Video input
VCR
Audio input
(left)-White
Audio input
(right)-Red
Camcorder
TV
Audio/Video
Antenna
S-Video
7