System Requirements; Recording With A Dv Connection Cable (Vp-D23I/D24I Only); Dv Vp-D23I/D24I; Ieee 1394 Data Transfer - Samsung VP-D23 Owner's Instruction Book

ENGLISH

IEEE 1394 Data Transfer

System requirements

CPU : faster Intel ® Pentium III™ 450Mhz compatible.
Operating system : Windows ®
Main memory : more than 64 MB RAM
IEEE1394 add-on card or built in IEEE1394 card

Recording with a DV connection cable (VP-D23i/D24i only)

1. Set the power switch to PLAYER
mode.
2. Connect the DV cable (not supplied)
from the DV IN/OUT port of
the camcorder to the DV IN/OUT port
of the other DV device.
Make sure that DV IN appears on
the screen.
3. Press the START/STOP button to begin
REC PAUSE mode.
PAUSE is displayed on the OSD.
4. Start playback on the other DV device while you monitor the picture.
5. Press the START/STOP button to start recording.
If you want to pause recording momentarily,
press the START/STOP button again.
6. To stop recording, press the
Reference
When using this camcorder as a recorder, the pictures that appear on a
monitor may seem uneven, however recorded pictures will not be affected.
Operations are not guaranteed for all of the recommended computer
environments mentioned above.
98SE, ME, XP, Mac OS (9.1~10.2)
(STOP) button.
IEEE 1394
CPU Intel ® Pentium III™ 450Mhz
Windows ® 98SE, ME, XP Mac OS 9.1~10.2
64 MB RAM
IEEE1394 IEEE 1394
DV
1.
2.
3.
4.
5. START/STOP /
6.
VP-D23i/D24i
PLAYER
DV
DV /
DV DV /
DV IN
START/STOP /
REC PAUSE
PAUSE OSD
DV
START/STOP
STOP
/
79 79