Demonstration - Samsung VP-D23 Owner's Instruction Book

ENGLISH
Advanced Recording

DEMONSTRATION

Demonstration automatically shows you the major functions that are
included with your camcorder so that you may use them more easily.
The DEMONSTRATION function may only be used in the
CAMERA mode without a tape inserted in the camcorder.
The demonstration operates repeatedly until the DEMONSTRATION
mode switched OFF.
1. Set the camcorder to CAMERA mode.
2. Press the MENU button.
The menu list will appear.
3. Turn the MENU DIAL to highlight INITIAL.
4. Select DEMONSTRATION from the submenu and press
the ENTER button.
5. To activate the DEMONSTRATION,
set DEMONSTRATION ON.
Press the menu button to quit the menu.
The demonstration will begin.
6. To end the DEMONSTRATION,
set the DEMONSTRATION to OFF.
Reference
The DEMONSTRATION function only works without a TAPE installed.
The DEMONSTRATION mode is automatically activated when the
camcorder is left idle for more than 10 minutes after switching to the
CAMERA mode (no tape is inserted in the camcorder).
If you press other buttons (FADE, BLC, PHOTO, EASY) during the
DEMONSTRATION mode, the DEMONSTRATION stops temporarily
and resumes 10 minutes later if you do not operate any other functions.
While setting the NIGHT CAPTURE to ON, the DEMONSTRATION
function does not work.
DEMOSTATION
DEMOSTATION
OFF
CAM MODE
1.
INITIAL CLOCK SET
CAMERA WL. REMOTE
2.
A/V BEEP SOUND
MEMORY
SHUT. SOUND
VIEWER
DEMO
3.
4.
5.
CAM MODE
INITIAL SET
CLOCK SET
WL.REMOTE
BEEP SOUND
6.
SHUTTER SOUND
DEMONSTRATION
DEMOSTATION
BLC
DEMOSTATION
NIGHT CAPTURE
DEMONSTRATION
CAMERA
DEMOSTATION
CAMERA
MENU
MENU DIAL
INITIAL
DEMOSTATION
ENTER
DEMOSTATION
DEMOSTATION
MENU
DEMOSTATION
DEMOSTATION
DEMOSTATION
CAMERA
10 DEMOSTATION
PHOTO
DEMOSTATION
ON
ON
OFF
FADE
EASY
10
41 41