Audio Dubbing; Dubbing Sound - Samsung VP-D23 Owner's Instruction Book

ENGLISH
Advanced Recording

Audio dubbing

The AUDIO DUBBING function only works in PLAYER Mode.
You can add sound to the original sound on a pre-recorded tape, recorded in
SP mode with 12bit sound.
Use the internal and external microphones or other audio equipment.
The original sound will not be erased.

Dubbing sound

1. Set the camcorder to PLAYER mode.
If you want to use an external microphone,
connect the microphone to the external MIC input
jack on the camcorder.
When you wish to dub using the External A/V
input, connect the AUDIO/VIDEO cable to the
camcorder by inserting the cable jack into the
A/Vin/out terminal at the left side of the
camcorder. (VP-D23i/D24i only)
- Press the MENU button, turn the
MENU DIAL to highlight A/V and
press the ENTER button.
- Turn the MENU DIAL to highlight
AV IN/OUT and press the ENTER button to
select AV IN.
2. Press the (PLAY/STILL) button and
find the timeframe of the scene to be dubbed.
3. Press the (PLAY/STILL) button to
pause the scene.
4. Press the A.DUB button on the
Remote Control.
A.DUB will be displayed on the LCD.
The camcorder is in a ready-to-dub
state for dubbing.
5. Press the (PLAY/STILL) button to start dubbing.
Press the (STOP) button to stop the dubbing.
Reference
You can not use the audio dubbing function while playing a write protected
video tape.
When you wish to dub using the External A/V input, you must connect the
AUDIO/VIDEO cable to the audio system from which you wish to record.
(VP-D23i/D24i only)
Audio dubbing
Audio (L) Audio (R)
AV IN
(VP-D23i/D24i only)
AUDIO/VIDEO
AUDIO DUBBING
1. PLAYER
A/V
AUDIO/VIDEO
A/V /
VP-D23i/D24i
MENU
DIAL
MENU DIAL
AV IN/OUT
2. PLAY/STILL
3. PLAY/STILL
4. A.DUB
5. PLAY/STILL
STOP
External A/V A/V
/
VP-D23i/D24i
12
/
MENU
A/V ENTER
A/V IN ENTER
/
/
A.DUB
/
63 63