Connecting A Power Source; To Use The Ac Power Adapter And Dc Cable; To Select The Camcorder Mode (Scd230/D250/D270 Only); Conexión A Una Fuente De Energía - Samsung SCD250 Owner's Instruction Manual

Digital video camcorder
Hide thumbs Also See for SCD250:
Table of Contents

Advertisement

ENGLISH
Preparation

Connecting a Power Source

There are two types of power source that can be connected to your
camcorder.
-
The AC Power Adapter and AC cord : used for indoor recording.
-
The Battery Pack : used for outdoor recording.

To use the AC Power adapter and DC Cable

1. Connect the AC Power adapter to
the AC cord.
2. Connect the AC cord to a wall
socket.
Note
The plug and wall socket type may
differ according to your resident
country.
3. Connect the DC cable to the
DC jack socket of the camcorder.
(When the battery is attached on
the set, you should keep outside
the projection of the DC cable.)
4. Set the camcorder to each mode by
holding down the tab on the power
switch and turning it to the CAM or PLAYER mode.
To select the CAMCORDER mode
If you want to use this unit as a camcorder,
set the mode switch to TAPE position.
If you want to use this unit as a DSC
(Digital Still Camera), set the mode switch to
MEMORY STICK position.
(SCD230/D250/D270 only)
Preparación
Conexión a una fuente de energía
Hay dos tipos de fuentes de energía a las que se puede conectar la
videocámara.
-
El adaptador de CA y el cable de CA: se emplean para
grabaciones en interiores.
-
La batería: se emplea para grabaciones en exteriores.
Utilización del adaptador de CA y del cable de CC
1. Conecte el adaptador de CA al
2. Conecte el cable de CA a una toma
Es posible que la clavija y la toma de
corriente sean de distinto tipo,
dependiendo de su lugar de residencia.
3. Conecte el cable de CC al conector
4. Ajuste la videocámara pulsando la
Selección de la modalidad de videocámara
SI desea utilizar este aparato como
MEMORY
videocámara, ajuste el interruptor de
STICK
modalidad en la posición TAPE (cinta).
Si desea utilizar este aparato como
TAPE
cámara fotográfica digital (DSC), ajuste el
interruptor de modalidad en la posición
MEMORY STICK. (sólo el modelos
SCD230/D250/D270)
ESPAÑOL
cable de CA.
de corriente.
Nota
de CC de la videocámara.
(Si la batería está conectada al
equipo, debería dejar fuera la
prolongación del cable de CC.)
lengüeta y colocándola en la
modalidad deseada: CAM o
PLAYER.
23
23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scd200Scd230Scd270

Table of Contents