Method Of Installation - Samsung AZ09A7KB Owner's Instructions Manual

Method of Installation

500mm
18
E-
Before installation, be sure to check the installation area or the air
conditioner, and drain hose.
Checkpoints prior to installation
1 Check the cabinet and front grille of the unit for any harmful defects
such as scratches.
2 Be sure to check the power supply.
- Refer to the specifications on the label attached to the unit.
Installation Conditions
1 As the unit is heavy, the wall or window of the installation area should
have sufficient strength and durability for operation of the air conditioner,
and for prevention of any vibration or noise.
If it is weak, reinforcement work should be performed separately.
2 It is advisable to install the air conditioner in the north or west side to
prevent the effect of direct sunlight.
When installing it in the south or east side due to unavoidable
circumstances, it is advisable to install the sunshade to prevent the
direct sunlight.
In this case, take care not to cause any hindrance to the flow of outside air.
3 When installing the air conditioner, be sure to obtain sufficient space on
the rear side of the unit for smooth flow of air.
When operating the air conditioner in closed areas such as inner building
with cooling operation, and result in trouble with the unit.
See the illustration below.
75mm
min.
200mm
500mm
750mm
If the wall is greater than 150mm thick,
cut the wall back on a 45˚ angle if possible.
100mm or more
Awning
300mm
500mm
Approx.3˚
150mm min.
Outdoor Side
45˚
Indoor Side
Fence, wall
or other
obstacle
45˚