Speakers - Philips FWB-P88/00 User Manual

9
CAUTION:
– For optimal sound performance, it is
recommended to use the supplied

speakers.

– Do not connect more than one speaker
to any one pair of +/- speaker
terminal.
– Do not connect speakers with
impedance lower than the speakers
supplied. Please refer to
SPECIFICATION section of this manual.
D Rear Surround
Speakers' Connection
Connect the black (non-marked) wires
to the black REAR SURROUND
terminals and the colored (marked)
wires to the grey REAR SURROUND
terminals.
E Center Speaker
Connection
Connect the black (non-marked) wires
to the black CENTER terminal and the
blue (marked wires) to the blue
CENTER terminal.
pg 01-28/P88/37-Eng 9
PREPARATION
F Line Out Connection
(wireless ready)
You can connect the audio left and right
LINE OUT terminals to a optional CD
Recorder ANALOG IN terminals. This
allows you to record in an analogue
format.
You can also install additional optional
front active speakers away from the
system (e.g. in another room) to reduce
the inconvenience of running long
speaker wires across rooms. You can
place as many remote speakers as you
like provided they operate at the same
radio frequency. Connect the wireless
radio frequency transmitter to the LINE
OUT terminals. Place the active
speakers at your preferred location. Be
sure to follow the instructions supplied
with the active speakers.
G Connecting other
equipment to your
system
You can connect the audio left and right
OUT terminals of a TV, VCR, Laser Disc
player, DVD player or CD Recorder to
the AUX/CDR IN terminals at the rear
of the system.
H Subwoofer Out
Connection
Connect the optional active subwoofer
to the SUBWOOFER OUT terminal.
The subwoofer reproduces just the low
bass sound effect (e.g. explosions, the
rumble of spaceships, etc.). Be sure to
follow the instructions supplied with the
subwoofer.
I Wireless Surround Out
Connection
You may connect transmitter unit of the
wireless rear speakers (not supplied) to
the SURROUND OUT terminal.
Note:
– Availability of wireless transmitter and
its peripherals are subjected to the
approval of local authorities. Please
check with respective local safety or
approving authority.
J Digital Out Connection
You can record the digital sound from
the CD, through this output, on any
audio equipment with digital input (e.g.
CD Recorder, Digital Audio Tape (DAT)
deck, Digital to Analog Converter and
Digital Signal Processor).
Connect one end of the cinch cable
(not supplied) to the DIGITAL OUT
socket and the other end to the audio
2/16/00, 9:12 AM
equipment with digital input.When
connecting the cinch cable, make sure it
is fully inserted.
K AC Power Supply
After all other connections have been
made, connect the AC power cord to
the system and to the wall outlet.
Inserting batteries into the
Remote Control
• Insert the batteries (Type R06 or
AA) into the remote control as
shown in the battery compartment.
• To avoid damage from possible
battery leakage, remove dead
batteries or batteries that will not be
used for a long time. For
replacement, use type R06 or AA
batteries.
3139 116 19711 (ENG)