Selecting The Colour System That Corresponds To Your Tv; Setting The Tv Display - Philips LX3900SA/69 Manual

Selecting the colour system that
corresponds to your TV
In order for a DVD to play on this DVD
system, the colour system of the DVD,
the TV and the DVD player should match.
Before changing the TV system, determine
the colour system of your TV.
1
In disc mode, press SETUP.
2
Press 2 repeatedly to select {VIDEO
SETUP PAGE}.
3
Press 34 to highlight {TV TYPE}, then
press 2.
4
Press 34 to highlight one of the options
below:
PAL – Select this if the connected TV has
the PAL colour system. It will change the
video signal of an NTSC disc and output it
to PAL format.
NTSC – Select this if the connected TV
has the NTSC colour system. It will
change the video signal of a PAL disc and
output it to NTSC format.
MULTI – Select this if the connected TV
is compatible with both NTSC and PAL
(multi-system). The output format will be
in accordance with the video signal of the
disc.
5
Select a setting and press OK.
Follow the instructions show on the
TV to confirm the selection (if any).
If a blank/distorted TV screen appears,
wait for 15 seconds for auto recovery.
To return to the previous menu, press 1.
TIPS:
To remove the menu, press SETUP.
001-041-LX39-22-Eng1

Setting the TV Display

Set the aspect ratio of the DVD Player
according to the TV you have connected.
The format you select must be available
on the disc. If it is not, the setting for TV
display will not affect the picture during
playback.
1
In disc mode, press SETUP.
2
Press 2 repeatedly to select {VIDEO
SETUP PAGE}.
3
Press 34 to highlight {TV DISPLAY}, then
press 2.
4
Press 34 to highlight one of the options
below:
4:3 PAN SCAN –
Select this if you have
a conventional TV and
want both sides of the
picture to be trimmed or formatted to fit
your TV screen.
4:3 LETTER BOX –
Select this if you have a
conventional TV. In this
case, a wide picture with
black bands on the upper and lower
portions of the TV screen will be
displayed.
16:9 – Select this if
you have a wide-
screen TV.
5
Select a setting and press OK.
17
Getting Started
3139 115 22871
12/12/2003, 10:20 AM
17