System Menu - Setup; Accessing To The Setup Options; System - Philips DVDR610/00 User Manual

System Menu - Setup

Accessing to the Setup
options
1
Turn on the TV set. Select the correct
Video In channel at the TV.
2
Press SYSTEM-MENU on the remote
control.
➜
The system menu appears on TV.
3
Press 4 repeatedly to select { Set-up }.
➜
Playback will pause.
4
Press 2 repeatedly to select one of the
options from { Set-up } and press 4 to
select a setting you want to adjust.
➜
Instructions for adjusting the settings
are provided in the following pages.
5
Press 2 to enter its options and use
1 2 3 4 to make your selection.
➜
If the selection in the menu is greyed
out, that means the feature is not
available or not possible to change at the
current state.
6
Press 1 to confirm.
7
To exit, press SYSTEM-MENU.
TIPS: Underlined option is the factory default setting.
Press 1 to go back to previous menu item. Press SYSTEM-MENU to exit the menu.
56
1DVDR6xx_Eng00_13454c

System

{ Eco Mode }
When switching the DVD recorder to
standby mode, the display panel will turn
blank to save power.
– { On } : Turn on Eco mode.
– { Off } : Turn off Eco mode.
{ Auto standby }
The system will automatically turn on to
standby mode if you do not press any
buttons within 15 minutes after a disc has
stopped playing or in Browser mode.
This is a power-saving feature.
– { On } : Turn on Auto standby mode.
– { Off } : Turn off Auto standby mode.
{ Second RC }
Allows you to control the DVD recorder
with a second remote control (not
supplied).
– { On } : Enable second RC control.
– { Off } : Disable second RC control.
56
3139 246 13454
9/28/04, 1:26 PM