Panasonic PT-LC50U Operating Instructions Manual page 50

Setting of the RGB/YP
DTV Format Signal, such as DVD or digital broadcast, etc. can be
input and projected with this Projector. When using this function,
please refer to
Format Signal
This LCD Projector allows input of RGB or YP
(Component input signal) to the RGB/YP
but you will need to change the setting of the input signal
selection manually when changing the signal to be input. If
the input signal selection is not set correctly, a normal image
will not be projected.
The RGB input signal is set at the factory. Please follow the
instructions below to change the input signal.
• Setting procedure
1
Press MENU to
display the menu.
2
Press or
"Function", and then
ENTER to display the
screen.
3
Press or
"RGB/YP
B
4
Press or to
change the input
signal.
Previous
screen
correctly connect to the output device of the DTV
and perform the following settings correctly.
to select
to select
P ".
R
P Input Signal Selection
B R
Picture
White Balance
Synchronization
Function
Language
Information
Function
RGB/YP P
B R
Projection Mode
Expansion
On Screen Display
Auto Lamp Off
Standard (Push ENTER)
P signals
B R
P input terminal,
B R
•RGB •YP
•Front •Rear
•ON
•ON
•YES •NO
P
B R
•OFF
•OFF
50