Selecting A New Network - Motorola T8190 Manual

Note: The phone is registered with the
selected network until you place or receive a
call or until you turn the phone off and on.
If registration is not successful, you see Not
Available. (Registration can fail if you travel
outside the network range after you locate
the network but before you attempt to
register.) Press

Selecting a New Network

To search for and select a new network:
1. Follow "Getting to Network Selection" on
page 108 to scroll to New System Search, and
=
press to activate a search.
2. Follow the appropriate instructions below:
If You See This
Message:
Search Done:
[ network ID ]
Search All Bands?
Not Available
Non-Public Not
Found
e
to exit, and retry later.
Do the Following:
• To search for the next best
network, press
When you see the desired
network, go on to step 3.
• To cancel the search and
exit the menu, press
• To continue searching for
networks in another band,
=
press .
When you see the desired
network, go on to step 3.
• To cancel the search and
exit the menu, press
e
Press to exit, and retry
the search later.
The phone returns to standby
mode.
Retry the search later.
c
.
e
.
c
.
109