Lifetime Timer - Motorola SELECT 6000 Manual

Table of Contents

Advertisement

Show Charge Per Call, Show Total Call Charges
These menu items are only available if you receive the Advice
A
of Charge service.
These options are used to display the call charges meter during
and after chargeable calls. The meter shows phone units or
currency depending on the setting of the 'Set Charge Type
option.
Call Charge Settings
This option allows you to customize your Advice of Charge
settings. You will be prompted to enter your PIN2 security code
before you can access the options.
This menu item is only available if you receive the Advice of
A
Charge service.
Reset Call Charges
This option resets your charge meters to zero.
Set Total Charge Limit
This option sets the maximum limit for call charges; once this limit
has been reached, the network will refuse any further chargeable
calls.
If you switch the charge limit
new limit. Enter the amount as either units or currency depending
on the setting of the
Set Charge Type
entered as whole numbers.
When the charge limit is
A
or data calls.
On
, you will be prompted to enter a
option. Units must be
, you will not be able to make fax
On
Once a limit is set, the in-call display will show the remaining
credit. When you reach your last two minutes, the warning
message
Approaching Charge Limit
warning alert will sound. The sound will be repeated when one
minute remains. When the limit is reached the message
will be displayed and you will not be able to
Limit Reached
make any more chargeable calls.
Once the limit is reached the Total Charge Limit will need to be
reset or switched off before any chargeable calls can be made.
Select
Off
to switch off the charge limit.
Set Charge Type
This option defines whether charge information is displayed as
either phone units or currency.
Currency
Sets the charge type to currency. You will be prompted to enter
the
. Enter a 3-character notation. For example,
Currency Name
enter USD for United States or CAD for Canada. You will then be
prompted for the
Charge Per Unit
press O.
Units
Sets the charge type to phone units.

Lifetime Timer

You can use this option to display the total time of all calls made
on your phone.
This meter can not be reset. The 'Reset All Timers,' 'Master
Reset,' or 'Master Clear' options have no effect.
Using the Options Menu
will be displayed and a
Charge
. Enter the amount and
55

Advertisement

Table of Contents
loading

This manual is also suitable for:

Microtac select 6000e

Table of Contents