Table of Contents
Advertisement
Call Holding and Call Waiting Messages
During Call Holding and/or Call Waiting operations, your phone
may display one or more of the following messages:
Trying
A request to hold the active call or swap the active call with a
held call has been made.
or
A request to reconnect the held call has been made.
Hold Failed
The request to hold a call has been unsuccessful.
Cannot Hold Second Call
A call is already on hold; you cannot place two calls on hold at
the same time.
Reconnect Failed
The held call could not be made active again.
Busy Try Later
Your phone is still working on a previous command. Wait a
short time before repeating the command.
Anonymous
The person who is calling you has blocked their number from
appearing on your phone.
Unavailable
The network is unable to provide the caller's number.
jCall Barring
Call barring is a network dependent option which can be used to
selectively bar outgoing and incoming calls.
If you change the barring setting, you may be asked to enter your
barring password. There will be a short delay while the phone
notifies the network of the new setting. When the change has
been made by the network, the phone will display a confirmation
message.
The initial password will be supplied to you by your Service
Provider when you subscribe to this service.
Bar Outgoing Calls
After selecting this option, there will be a short delay while the
phone asks the network for the current setting.
Int'l Calls
Bars outgoing international calls.
Int'l Calls Except Home
Bars outgoing international calls, except those to your home
country.
All Calls
Bars all outgoing calls, except emergency calls.
Off
Disables all call barring for outgoing calls.
Using the Options Menu
39
Advertisement
Table of Contents
